Duplex SB100

Manifolds and stabilizers

The manifold Duplex SB100 is designed to be used as a third source of supply in medical central gas systems.

Duplex SB100

Duplex SB100Introduction

The manifold will deliver gas when
the nominal supply system pressure falls below a set level
(7 bar). This is a back up source.
Together with Duplex SB100 always use the Duplex PNP100 unit and alarm
providing all alarms according to standard (like Gas alarm). As 2nd stage it
is recommended to use a stabilizer.
Gas Alarm is a standard accessory. The Gas alarm gives visual and audible
indication.

Duplex SB100Features

It surveils and the alarm sounds when the following happens:
1. Too high outlet pressure
2. Too low outlet pressure
3. Empty cylinder

General properties

(Medical) Gases:	O2, Air, N2O, CO2 (all medical gases)
Nominal flow:	100 m3/h
Inlet nominal pressure:	300 bar (30 000 kPa)
Outlet nominal pressure:	7 bar (setting range 7–15 bar)
Inlet connection:	W21,8×1/14“M
Outlet connection:	G3/4“M + soldering piece pipe ø 15 mm
Pressure relieve valve:	17 bar including manual activation
Pressure relive valve pipe dimension:	ø 10 mm
Purge valves connection:	W21,8×1/14“M + soldering piece pipe ø 10 mm

Configurations


Loading... ... loading table ...

Item No.	Denomination	Gas
073430011	DUPLEX SB100 O2 GCE 000	O<sub>2</sub>
073430012	DUPLEX SB100 AIR GCE 000	Medical Air
073430013	DUPLEX SB100 N2O GCE 000	Nitrous Oxide
073430014	DUPLEX SB100 CO2 GCE 000	Carbon Dioxide