MC80 - Duplex

MC80 - Duplex

Manifolds and stabilizersGCE Healthcare

MC80 - HP UNIT + MC80 - STABILIZER + GAS ALARM SYSTEM

Talk to the experts

MC80 - DuplexIntroduction

1. MC80 - HP UNIT
This module contains two regulators with pressure relieve valves and it is connected to two various cylinder banks with high pressure hoses. When the cylinder bank, which has been connected for operation, has been emptied the other duty side is automatically connected.

2. MC80 - STABILIZER
The stabilizer makes the operating pressure in the distribution system remain constant. The module contains two regulators with pressure relieve valves. Since the gas pressure is reduced in two steps the drop in pressure, when changing from the operating cylinder to the other bank of cylinders, is kept to a minimum. The unit is prepared for connection to a liquid oxygen supply tank (LOX).

3. GAS ALARM SYSTEM - based on the product variant
Alarm systems from GCE are user friendly solutions, with simple control and lots of extra functionality. It surveils electronically and the alarm sounds when the following happens:

1. Too high or too low distributing pressure,
2. Too high intermediate pressure,
3. Leakage on the reserve gas cylinder bank,
4. When change of operating side has been effected.

When connected to a liquid tank the following disturbances will be reported:

1. Too high or too low distribution pressure,
2. Too high intermediate pressure,
3. Leakage from the reserves,
4. When change of operating side has been effected.

The product is either equipped with an alarm system or a sensor only.

MC80 - DuplexFeatures

DUPLEX (MC80) INCLUDES THE FOLLOWING COMPONENTS:

  • MC80 – HP Unit
  • MC80 – Stabilizer
  • Sensors 4-20 mA. Alarm or just sensor based on item in column "Alarm"
  • Evacuating kits for collecting pipe
  • Shut-off valve for the distribution line
  • HP filters

FOR A COMPLETE DUPLEX MC80 STANDBY MANIFOLD ADD:

  • Collecting pipe set (high pressure valves and non-return valves, high pressure components)
  • High pressure hoses with safety wire
  • Gas name sign
  • Connection pipe 90 degree
  • Extension pipes if needed

MC80 - DuplexGeneral properties

General properties

GasesO2, Air, N2, N2O, CO2
Nominal flow (m3/h)200
TECHNICAL DATA - HIGH PRESSURE UNIT MC80
Inlet nominal pressure (BAR)200 (20 000 kPa)
Outlet nominal pressure12 bar (setting range 10–16 bar)
Inlet connectionW21.8×1/14"M
Outlet connection G3/4"F
Pressure relieve valve 17 bar
Pressure relieve valve pipe dimension∅ 10 mm
Purge valves connection W21.8×1/14"M + pipe ∅ 15 mm
TECHNICAL DATA - STABILIZER MC80
Inlet maximal pressure 20 bar (2000 kPa)
Outlet nominal pressure4,5 bar (setting range 0,5–6 bar)
Inlet connection G3/4"F
Outlet connectionG3/4"F
Pressure relieve valve6,8 bar
Pressure relieve valve pipe dimensionø 15 mm

Configurations

Loading...
... loading table ...

Quality Standards

We comply with all relevant regulations

See our CERTIFICATIONS >

MC80 - DuplexDownloads

Find our Products

Source our products wherever you are

You can have confidence in our global network

Find a distributor
GCE main LogoPart of ESAB Corporation

GCE Group

Turmstrasse 30

6321 Steinhausen

Zug

Switzerland

Copyright © 2024 GCE. All rights reserved.
facebooktwitterlinkedinyoutubeinstagram